Article

Taleb, Mushtaq and Khalid, Ruzelan and Ramli, Razamin and Mohd Nawawi, Mohd Kamal (2023) An Integrated Approach of Discrete Event Simulation and a Non-Radial Super Efficiency Data Envelopment Analysis for Performance Evaluation of an Emergency Department. Expert Systems with Applications, 220 (119653). pp. 1-18. ISSN 0957-4174

Mohd Nawawi, Mohd Kamal and Chaloob, Ibrahim Zeghaiton and Ahmed, Jehan Saleh and Ramli, Razamin and Sufahani, Suliadi Firdaus (2022) Maximization of Strategic Crops Production in Iraq with Fuzzy Goal Programming. Universal Journal of Agricultural Research, 10 (1). pp. 20-26. ISSN 2332-2268

Man, Siti Mariam and Zain, Zakiyah and Mohd Nawawi, Mohd Kamal (2020) Batch sizing and lot splitting strategies to reduce cycle time in semiconductor assembly process. International Journal of Supply Chain Management (IJSCM), 9 (2). pp. 245-251. ISSN 2050-7399

Khalid, Ruzelan and Mohd Nawawi, Mohd Kamal and Kawsar, Luthful A. and Ghani, Noraida A. and Kamil, Anton A. and Mustafa, Adli (2020) Optimal routing of pedestrian flow in a complex topological network with multiple entrances and exits. International Journal of Systems Science, 51 (8). pp. 1325-1352. ISSN 0020-7721

Khalid, Ruzelan and Mohd Nawawi, Mohd Kamal and Baten, Md Azizul and Ishak, Nurhanis (2018) Analyzing and Optimizing Pedestrian Flow through a Single Route in a Topological Network. International Journal of Engineering & Technology, 7 (2.14). pp. 43-47. ISSN 2227-524X

Zainol Abidin, Mohammad Zukuwwan and Mohd Nawawi, Mohd Kamal and Mat Kasim, Maznah (2018) Identifying Players’ Selection Criteria for the Development of Decision Support System for Football and Hockey. Advanced Science Letters, 24 (11). pp. 8690-8694. ISSN 1936-6612

Chaloob, Ibrahim Zeghaiton and Ramli, Razamin and Mohd Nawawi, Mohd Kamal (2018) Measuring Economic and Environmental Efficiency for Agricultural Zones in Iraq Using Data Envelopment Analysis. International Journal of Information and Decision Sciences, 10 (3). pp. 235-248. ISSN 1756-7017

Zerafat Angiz, Madjid Langroudi and Mohd Nawawi, Mohd Kamal and Khalid, Ruzelan and Mustafa, Adli and Emrouznejad, Ali and John, Robert and Kendall, Graham (2017) Evaluating decision-making units under uncertainty using fuzzy multi-objective nonlinear programming. INFOR: Information Systems and Operational Research, 55 (1). pp. 1-15. ISSN 0315-5986

Abd Jalal, Muhammad Zulqarnain Hakim and Mohd Nawawi, Mohd Kamal and Mat Desa, Wan Laailatul Hanim and Khalid, Ruzelan and Abduljabbar, Waleed Khalid and Ramli, Razamin (2017) Green Supply Chain: Simulating Road Traffic Congestion. Journal of Physics: Conference Series, 890. pp. 1-8. ISSN 1742-6588

Khalid, Ruzelan and Baten, Md Azizul and Mohd Nawawi, Mohd Kamal and Ishak, Nurhanis (2016) Analyzing and optimizing pedestrian flow through a topological network based onM/G/C/Cand network flow approaches. Journal of Advanced Transportation, 50 (1). pp. 96-119. ISSN 0197-6729

Mohd Jamil, Jastini and Mohd Nawawi, Mohd Kamal and Ramli, Razamin (2016) Customer satisfaction model for mobile phone service providers in Malaysia. Journal of Telecommunication, Electronic and Computer Engineering, 8 (8). pp. 165-169. ISSN 2180-1843

Zeghaiton Chaloob, Ibrahim and Ramli, Razamin and Mohd Nawawi, Mohd Kamal (2016) A New Multi-Interval Weights Approach in Fuzzy Goal Programming for a Multi-Criteria Problem. International Journal of Mathematics in Operational Research, 9 (2). pp. 214-229. ISSN 1757-5850 (Unpublished)

Mat Desa, Wan Laailatul Hanim and Kamaruddin, S. and Mohd Nawawi, Mohd Kamal and Zulkepli Hew, Jafri (2015) Evaluation on absenteeism effect in production line at Aircraft Composite Manufacturer. Jurnal Teknologi, 77 (5). pp. 63-67. ISSN 0127-9696

Khalid, Ruzelan and Mohd Nawawi, Mohd Kamal and Kawsar, Luthful A. and A.Ghani, Noraida and Kamil, Anton Abdulbasah and Mustafa, Adli (2015) The evaluation of pedestrians’ behavior using M/G/C/C analytical, weighted distance and real distance simulation models. Discrete Event Dynamic Systems. pp. 1-38. ISSN 0924-6703

Abdul Ghani, Noraida and Mohd Nawawi, Mohd Kamal and Khalid, Ruzelan and Kawsar, Luthful A. and Kamil, Anton A. and Mustafa, Adli (2014) Comparison of discrete simulation models’ results in evaluating the performances of M/G/C/C networks. The Online Journal of Science and Technology, 4 (4). pp. 65-71. ISSN 2146-7390

Mat Desa, Wan Laailatul Hanim and Kamaruddin, Shahrul and Mohd Nawawi, Mohd Kamal and Khalid, Ruzelan (2013) Evaluating the performance of a multipart production system using discrete event simulation (DES). International Proceedings of Economics Development and Research, 63 (13). pp. 64-67. ISSN 20104626

Baten, Md Azizul and Khalid, Ruzelan and Mohd Nawawi, Mohd Kamal (2013) Optimal control of periodic-review inventory production systems with Weibull deteriorating items. International Journal of Applied Mathematics and Statistics™ (IJAMAS), 40 (10). pp. 84-98. ISSN 0973-7545

Mohd Nawawi, Mohd Kamal and Nik Mohamed, Nik Mohd Zuki and Aminuddin, Adam Shariff Adli (2013) Planning and design of a knowledge based system for green manufacturing management. IOP Conference Series: Materials Science and Engineering, 50. pp. 1-7. ISSN 1757-8981

Khalid, Ruzelan and Mohd Nawawi, Mohd Kamal and Kawsar, Luthful A. and Abdul Ghani, Noraida and Kamil, Anton A. and Mustafa, Adli (2013) A discrete event simulation model for evaluating the performances of an M/G/C/C state dependent queuing system. PLoS ONE, 8 (4). pp. 1-9. ISSN 1932-6203

Mat Desa, Wan Laailatul Hanim and Kamaruddin, Shahrul and Mohd Nawawi, Mohd Kamal (2012) Modeling of aircraft composite parts using simulation. Advanced Materials Research, 591-59. pp. 557-560. ISSN 1662-8985 (Unpublished)

Mohd Nawawi, Mohd Kamal and Khan, Mohammed Khurshid and Hussain, Khalid (2008) Knowledge-Based Collaborative Lean Manufacturing Management (KBCLMM) system. Journal of Konbin, 5 (8). pp. 145-156. ISSN 1895-8281

Mohd Nawawi, Mohd Kamal and Mat Tahar, Razman (2004) Simulating Primary Manufacturing Area (PMA) activities of fixed trailing edge panels production. International Journal of Management Studies (IJMS), 11 (2). pp. 137-152. ISSN 0127-8983

Mohd Nawawi, Mohd Kamal and Tahar, R. M. and Omar, Zurni (2004) Simulation-aided production of aircraft's composite parts. Journal of ICT, 3 (1). pp. 83-99. ISSN 1675-414X

Monograph

Mohd Jamil, Jastini and Mohd Nawawi, Mohd Kamal and Ramli, Razamin (2014) Constructing a customer satisfaction model for a utility service industry using partial least squares approach. Project Report. Universiti Utara Malaysia, Sintok. (Unpublished)

Mohd Nawawi, Mohd Kamal and Mat Tahar, Razman and Salit, Mohd Safuan and Nik Mohamed, Nik Mohd Zuki (2014) A hybrid knowledge-based system for collaborative green manufacturing management. Project Report. Universiti Utara Malaysia, Sintok. (Unpublished)

Conference or Workshop Item

Mohamed Nadhar Khan, Sahubar Ali and Baten, Md Azizul and Mohd Nawawi, Mohd Kamal and Murat, Rusdi @ Indra Zuhdi (2016) Determining technical, allocative and cost efficiencies of rice farmers in Kedah, Malaysia using data envelopment analysis. In: 4th International Conference on Quantitative Sciences and Its Applications (ICOQSIA 2016), 16–18 August 2016, Bangi, Selangor, Malaysia.

Zainol Abidin, Mohammad Zukuwwan and Mohd Nawawi, Mohd Kamal and Mat Kasim, Maznah (2016) Research design of decision support system for team sport. In: 4th International Conference on Quantitative Sciences and Its Applications (ICOQSIA 2016), 16–18 August 2016, Bangi, Selangor, Malaysia.

Jamil, Jastini and Mohd Nawawi, Mohd Kamal and Ramli, Razamin (2016) A customer satisfaction model for a utility service industry. In: 2016 International Conference on Applied Science and Technology (ICAST 2016), 11–13 April 2016, Kedah, Malaysia.

Mohd Sharif, Nurul Atikah and Aziz, Azizah and Ahmad, Norazura and Mohd Nawawi, Mohd Kamal (2016) Modelling an outpatient unit in a clinical health centre using discrete event simulation. In: 4th International Conference on Quantitative Sciences and Its Applications (ICOQSIA 2016), 16–18 August 2016, Bangi, Selangor, Malaysia.

Man, Siti Mariam and Zain, Zakiyah and Mohd Nawawi, Mohd Kamal (2015) Cycle time reduction using lean six sigma in make-to-order (MTO) environment: Conceptual framework. In: 2nd Innovation and Analytics Conference & Exhibition (IACE 2015), 29 September –1 October 2015, TH Hotel, Alor Setar, Kedah, Malaysia.

Mohd Nawawi, Mohd Kamal and Che Jamil, Fadhilah and Mohamad Hamzah, Firdaus (2015) Evaluating performance of container terminal operation using simulation. In: International Conference on Mathematics, Engineering and Industrial Applications 2014, 28–30 May 2014, Penang, Malaysia.

Khalid, Ruzelan and Ishak, Nurhanis and Baten, Md Azizul and Mohd Nawawi, Mohd Kamal (2015) Optimizing the throughput of an M/G/C/C topological network. In: 2nd Innovation and Analytics Conference & Exhibition (IACE 2015), 29 September –1 October 2015, TH Hotel, Alor Setar, Kedah, Malaysia.

Maram, Venkataramana and Mohd Nawawi, Mohd Kamal and Abdul Rahman, Syariza and Sultan, Sultan Juma (2015) Simulation as a planning tool for job-shop production environment. In: 2nd Innovation and Analytics Conference & Exhibition (IACE 2015), 29 September –1 October 2015, TH Hotel, Alor Setar, Kedah, Malaysia.

Aminuddin, Adam Shariff Adli and Mohd Nawawi, Mohd Kamal and Nik Mohamed, Nik Mohd Zuki (2014) Analytic network process model for sustainable lean and green manufacturing performance indicator. In: Statistics and Operational Research International Conference (SORIC), 3–5 December 2013, Sarawak, Malaysia.

Ishak, Nurhanis and Khalid, Ruzelan and Baten, Md Azizul and Mohd Nawawi, Mohd Kamal (2014) Queuing network approach for building evacuation planning. In: 3rd International Conference on Quantitative Sciences and its Applications (ICOQSIA 2014), 12–14 August 2014, Langkawi, Kedah Malaysia.

Aminuddin, Adam Shariff Adli and Mohd Nawawi, Mohd Kamal (2011) Conceptual model of sustainable lean and green manufacturing management system: Initial stage. In: National Conference on the Tenth Malaysia Plan: Transformation Towards a High Income Advanced Economy, 18th July 2011, Seri Pacific Hotel, Kuala Lumpur. (Unpublished)